This guide connects one Star mC-Print3 (model MCP31Ci) to Opero, from the box to a test print. Repeat it for each printer.
Before you open the box. Once a printer has been opened or set up, we replace or refund it only if it arrived damaged or had a hardware fault when you first set it up, and you email support@operoos.com within 7 days of delivery. Keep the box and all the packing until the printer passes its test print in section 4. If the box looks damaged, take photos of it before you open it. If the printer is damaged, take photos of the printer and the box. We ask for them, and for the printer's serial number. A fault found later is a warranty matter: email us first, and see our Opero Hardware Warranty page. If you are not sure you will keep it, decide before you open the box. Our Refund Policy has the details.
How it works. The printer plugs by USB into a kiosk, register tablet or kitchen screen running the Opero Android app. That device prints for it. Every few seconds it checks in with Opero over its Wi-Fi and sends anything waiting to the printer. The printer needs no network cable, and you never open its own settings. Each device takes one printer.
Keep the device on and plugged into power. If it is off or off the Wi-Fi, its printer prints nothing.
In this guide, "section" means one of the numbered parts below (1 to 7), and "step" means a numbered line inside a section.
What you need
- The printer, its power adapter and its power cable. All three are in the box. The adapter is a separate power brick, so leave room for it and have a free outlet.
- A roll of 3 1/8 in thermal paper. It is not in the box.
- A USB-A to USB-C data cable. It is not in the box. It goes from the USB-A port on the kiosk, tablet or screen to the USB-C port on the printer.
- A USB-C to USB-C cable will not work.
- A tablet or screen with only a USB-C port needs a USB-C OTG adapter with a charging port.
- The device the printer plugs into: a kiosk, register tablet or kitchen screen running the Opero Android app, on Android 12 or newer. Opero's Setup installs the Opero app on the device and walks you through it. It must be on your restaurant's Wi-Fi and plugged into power.
- No other POS or printer app on that device. Other printer apps can take over the printer.
- Your own Opero login, as an owner or manager, to open Setup in Opero.
- A manager PIN: a staff member with the Manager role and a PIN. The device asks for it before it sets up a printer.
- A location set up in Opero. Each printer belongs to one location.
1. Get the device ready
- Set up the kiosk, register tablet or kitchen screen in Opero first. In Opero, open Setup, add the station (Kiosk, Counter or Kitchen screen) and follow its steps until the device shows Opero. Opero kiosks arrive with the app installed.
- Keep the device plugged into power and on your Wi-Fi.
- Remove any other POS or printer app from the device.
- Check that you have a manager PIN. If not, add a staff member with the Manager role and a PIN in Opero, under Staff.
2. Connect the printer and turn it on
Before you start, read Star's safety instructions in the box. Setting up a kitchen printer? Read "Where to put kitchen printers" near the end of this guide first.
- Load the paper roll. The mC-Print3 loads paper from the front. Star's easy setup guide in the box shows how.
- Connect the power adapter to the printer and plug it into the outlet. Turn the printer on.
- Plug the USB cable into the USB-C port on the printer and the USB port on the kiosk, tablet or kitchen screen. You do not need the printer's LAN port.
- The device asks which app should use the printer. Tap Opero, then Always.
3. Set up the printer on the device
- On the device, open the printer setup:
- Kiosk: tap 5 times quickly in the middle of the top edge.
- Kitchen screen: tap the orange Printer plugged in button at the top.
- Register tablet: tap the orange Printer plugged in button at the bottom of the register screen.
- Enter a manager PIN.
- Tap Set up this printer. The device adds the printer to Opero for you. There is nothing to type into the printer and no password to write down.
- Wait for the printer to check in. In Opero's Setup, the station's Printer step says "Printer found" when it does. This can take up to a minute.
Signed in to Opero on that device with your own login? You can also go to Devices, then Printers, in the Opero app and tap USB printer on this device. It asks what the printer is for and which device this is. This button shows only in the Opero app, not in a web browser.
4. Print a test page
- In Setup, on the station's Printer step, press Print a test page.
- A test page comes out a few seconds later. Opero asks "Did a test page come out?" Press Yes, it printed. If nothing came out, press No, help me for tips, or see "If something is wrong".
- For a kitchen screen, press Send kitchen tickets here if Setup offers it. Every kitchen ticket then prints on this printer. Stations keep the setting you gave them: one you set to Screen only yourself still prints nothing, so check Stations in section 6.
- You can also press Test print on the printer's row under Devices, then Printers.
- The time on the slip is in UTC, a world standard time, so it will not match your clock.
- A test print never opens the cash drawer. That is on purpose.
5. Check the printer in Opero
- In Opero, go to operoos.com/devices/printers, or Devices, then Printers. The page is titled "Receipt & kitchen printers".
- Find your printer in the table. Look at Status and Last poll.
- pending: the printer has not checked in yet. Last poll says "never".
- online: its device is checking in for it. Last poll shows how long ago, for example "20s ago". Opero updates it about once a minute, so up to a minute is normal.
- offline: nothing has checked in for the printer for at least 3 minutes. The device may be off or off the Wi-Fi, or the USB cable may be out.
- error: the printer reported that a print failed. Last condition shows the printer's reason. See "If something is wrong". The status goes back to online about 5 minutes after the last failed print, as long as the device keeps checking in.
6. Choose where each document goes
Some jobs go to the right printer by themselves:
- Kiosk receipts print automatically on the printer plugged into the kiosk that took the order. A kiosk with no printer of its own sends them to the location's Receipt printer.
- Counter receipts print when staff press "Print receipt", on the printer plugged into that register. That register's cash drawer opens from the same printer (section 7).
- Kitchen tickets print on the printer you chose with Send kitchen tickets here in section 4.
Below the printer table is Where each document goes. It sets the rest for the location: one receipt printer, one kitchen printer and one order (expo) printer. One mC-Print3 can do all three jobs.
- Receipt printer: choose the printer at your counter.
- It prints receipts for a kiosk or register with no printer of its own, refund receipts, and receipts printed from Opero signed in with your own login rather than the register's.
- Cash taken at a register with no printer of its own, or in Opero signed in with your own login, opens the drawer on this printer. If you have one register, choose its printer here.
- Kitchen printer: the printer for kitchen tickets. Every station's tickets go to this one printer. Send kitchen tickets here (section 4) chooses it for you and sets Kitchen tickets to "One ticket per order". To get one ticket per station instead, set it to "One ticket per station". "One ticket per order, single list" also prints one ticket per order, with every item in one list and no station headings.
- Stations: each kitchen station has its own setting. A station prints only when set to Paper or Paper + screen. Send kitchen tickets here sets the default for stations to Paper + screen (or keeps Paper if you had chosen it). A station you set to Screen only yourself stays on Screen only until you change it here. As the page says: "Paper is opt-in per station. Anything left on Screen only prints nothing at all."
Choice What it does (Opero's words) Screen only "No paper. The ticket lives on the KDS." Paper "Prints, and a confirmed print clears it off the board." Paper + screen "Prints, and a cook still bumps it by hand." - Expo ticket: one page per order, for the expo or pass. Under When to print, choose:
Choice What it prints (Opero's words) Off "No order-level ticket." When fired "A checklist with empty boxes, to tick as items land." When ready "A slip confirming every station finished, with times." Both "One of each." - It starts on Off. Even when it is on, Opero skips it for an order made at a single station that prints its own paper ticket.
- Expo printer: leave it on None to use the kitchen printer, or choose another printer.
- If Opero warns that expo is on but there is no printer to send it to, choose a kitchen printer or an expo printer. Until you do, nothing prints.
- Press Save routing. Wait for "Routing saved."
7. Cash drawer
Opero can open a Star printer-driven cash drawer that is cabled to an mC-Print3.
- Plug the drawer's cable into the port marked Cash Drawer/Buzzer on the back of the printer at your register, the one plugged into the register tablet. Not a USB or LAN port.
- In the printer table, look at the Cash drawer column for that printer. The box must be ticked. Ticked, it reads "Drawer here"; unticked, "No drawer". Setting up a register's printer ticks it for you.
- If you move the drawer to another printer, move the tick too. Opero cannot see the cable.
- The drawer opens on cash sales at that register, including a walk-up sale at the counter. The handheld pad has no cash button: cash is taken at the counter.
- Cash paid on an open tab or table check opens the drawer at the register that takes it, the same as a walk-up sale. If that register is signed in with your own login rather than its own, the drawer on the location's Receipt printer opens instead (section 6), so with one register, choose its printer as Receipt printer.
- The register tablet checks in with Opero for its printer every few seconds, and the drawer opens at the next check-in. Expect a delay of up to about 5 seconds.
- If the drawer job is not picked up within about 90 seconds of a cash sale (for example, the register tablet or the printer is off, or the tablet is off the Wi-Fi), the sale still records, but Opero drops the drawer job. The drawer does not open later when they come back. That is on purpose. If they come back within those 90 seconds, the drawer can still open then, so stay at the till until it opens or the 90 seconds pass.
- Leave the printer's own drawer settings at the factory setting. Opero opens the drawer itself.
- To test the drawer without a sale, press Open drawer on the POS, then Open now. The drawer opens with no sale, and Opero logs each opening. If you do not see Open drawer, that login is not allowed to open the drawer without a sale.
If something is wrong
| What you see | What to do |
|---|---|
| The device never asks which app should use the printer | Check the printer is on. Check the cable: a USB-A to USB-C data cable, from the device's USB-A port (or a USB-C OTG adapter) to the printer's USB-C port. A USB-C to USB-C cable will not work. Unplug the cable and plug it back in. |
| Another app opened when you plugged in the printer | Remove other printer apps from the device. Then unplug the USB cable, plug it back in, and tap Opero, then Always. |
| There is no Printer plugged in button, or tapping the kiosk's top edge does nothing | The device must run the Opero app, not a web browser. On a register, sign in with the register's own device login, the one Setup gave it; a register opened with your own login shows no button. Unplug the USB cable, plug it back in, and tap Opero, then Always. Still nothing? Email support@operoos.com. |
| Status stays pending, or the printer went offline | Check the printer is on, has paper and the cover is shut. Check the USB cable is in both ends, and the device is on and on the Wi-Fi. Still offline? Set the printer up again on the device (section 3). |
| Two or more printers went offline at the same moment | It is probably something they share: power, your Wi-Fi or your internet connection. Open operoos.com on a device on the same Wi-Fi. If that works, the problem may be on Opero's side. Email support@operoos.com. |
| A kitchen station's ticket did not print | Check that station under Stations. Screen only prints nothing. That is by design, and the ticket is still on the KDS. Set it to Paper or Paper + screen and press Save routing. If the station is already on Paper or Paper + screen, the printer may have had a problem (see the Last condition row below). The ticket stays on the KDS board. If your kitchen has no KDS screen, nobody sees it there: after fixing the printer, open the KDS in Opero, find the tickets that did not print and tell the cooks. |
| A counter receipt did not print | Counter receipts print only when someone presses "Print receipt". They print on the printer plugged into that register. If the register has no printer, or Opero is signed in with your own login, they print on the Receipt printer: check that one is chosen and that Save routing was pressed. To print it again once the problem is fixed: if the sale screen is still showing, press Print receipt again. Otherwise open Refunds on the POS, find the sale and press Reprint receipt. Each press prints a new copy. Reprint last, on the printer's row in Devices, reprints whatever that printer printed last, which on a shared printer may be a kitchen ticket. |
| Last condition shows a problem, for example the cover is open | Fix it at the printer: close the cover, or check the paper roll. A ticket or receipt that was waiting while the cover was open may still print once you close it. Opero does not retry a print that failed. Check what came out before you print anything again. For a kitchen ticket, see "A kitchen station's ticket did not print". For a receipt, see "A counter receipt did not print". |
| Tickets hang from the printer | The cutter makes a partial cut, so each ticket keeps a small tab. Long tickets usually drop under their own weight. Short ones may need a tear. |
| The drawer did not open | Check, in this order: the drawer cable is in the printer's Cash Drawer/Buzzer port; "Drawer here" is ticked on that printer; if the register was signed in with your own login rather than its own, that printer is the Receipt printer; the register tablet and printer were on and online within about 90 seconds of the sale (if not, the drawer does not open later, on purpose); the drawer is not locked with its key. |
Where to put kitchen printers
- Keep kitchen printers away from grills, fryers and other heat. The mC-Print3 prints on thermal paper, and heat darkens thermal paper. Heat, steam and grease can make tickets hard to read. It is not a printer for the hot line.
- Star rates it for operating temperatures of 41 to 113 °F.
- An expo or pass station, away from the cooking line, is a good place for it.
- A kitchen printer plugs by USB into the kitchen screen, so put it within reach of the screen's USB cable, with an outlet for its power adapter. It needs no network cable. Keep the kitchen screen on and on the Wi-Fi.
- One kitchen printer gets every station's tickets. Put it where the cooks can reach it.
- Tickets come out the front, so leave room in front of the printer.
Need help?
Opero helps you get your printer working with Opero. Email support@operoos.com. For a printer or cash drawer bought on its own, support is by email only. There is no phone line, and we do not come on site. Bought a kiosk kit? We help you set up the kit by phone or video, or on a setup visit, as the kit page and our Terms of Sale say.
If you think the printer is faulty, email us first, before you contact Star or send anything back. See our Refund Policy and our Opero Hardware Warranty page.